Images
PUBLIC and PRODUCT LIABILITY INSURANCE FOR BICYCLE FRAMEBUILDERS – Updated
I previously posted a piece on public and product liability and general insurance for framebuilders. Since then my own circumstance have changed somewhat and I ...
Read More
T47 Bottom Brackets and Taps and Facers (UPDATED)
I was once asked if I would be able to make a bike with an oversize bottom bracket and full internal cable routing, amongst other ...
Read More
Handlebars
I copied this handlebar from Jon Thompson, who made some in this fashion for fixies (http://tomobikes.co.uk). As such he made them quite narrow, ideal for ...
Read More
Oxy-Propane Brazing Update 3
I use oxygen and propane for my brazing. I did not want the expense and extra safety concerns of storing and using acetylene, and in ...
Read More
Tube Mitering on a Lathe – Update 2
Tube mitering is a fundamental part of custom frame building and I am sure there is always a need to be able to produce good ...
Read More
Carbon Fibre Framebuilding – Any Interest? – UPDATED
The purpose of the first post on this subject was to try and ascertain the interest in the frame building community in constructing their own carbon fibre ...
Read More
Cubic Boron Nitride – Any Use to Framebuilders?
I have had some problems in releasing my home made seat tube heat sink from the seat tube after brazing, in as much as the ...
Read More
Lugged Single Chainring Winter / Light Touring Bike
I wanted lightweight bike with lower gears for cycling holidays and winter use. Rather than going for a mountain bike group set I thought I ...
Read More
Where do I Obtain Bicycle Framebuilding Parts?
This is a question I am often asked. Anyone who has already built a frame outside a course will already know the answer, but it ...
Read More
Framebuilder Tooling – Using a Milling Machine
A Milling Machine is usually the second major machine tool any aspiring metalworker will obtain, after a lathe. More correctly known as a vertical mill ...
Read More
Categories
RECENT POSTS
SKARPER electric assist review
I was one of the first to order a Skarper electric assist device as promoted ...
Making Head Tube Cutters UPDATED
For my last three frame projects I chose a tapered head tube for a tapered ...
Proxxon Belt Sander
I recently purchased this 240v hand held belt sander, and wished I had done this ...