CEEWAY: 80/82 West Street, Erith, Kent, DA8 1AQ, UK
Telephone: 01322 442 990
Website: http://www.framebuilding.com  http://www.ceeway.com
One stop supplier for all framebuilding requisites.

THE BICYCLE ACADEMY: Welsh Mill, Park Hill Drive, Frome, Somerset BA11 2LE Telephone 01373 473767
Website: http://www.thebicycleacademy.org
Stockists of a range of Columbus and Reynolds tubing and other
parts and tools. Now selling a range of jigs and tools through their Academy Tools brand www.thebicycleacademy.org/academytools. Also a full range of welding equipment and consumables through their Sif shop.

Shaftmoor Industrial Estate, 226 Shaftmoor Lane, Hall Green, Birmingham B28 8SP
Tel : 0121 7773 853
Website: http://reynoldstechnology.biz
Sell their own tubing and lugs. Contact with your requirements and
they will forward price lists etc. Minimum order £150. Will sell to
amateur framebuilders but will ask for your experience.

ANVIL TOOLS:  formerly 502 Violet Street,Golden, Colorado 80401
Superb framebuilding jigs and tools.
Unfortunately Anvil have now closed due to retirement so will only be available second hand.

SPUTNIK TOOL: 370 Old County Road, Sedgwick, Maine ME 04676
Website: http://www.sputniktool.com
All tools made individually by Jeff Buchholz

COFA ENGINEERING: Cottage Farm workshops, Whale Wharf lane, Littleton, BS35 1NW
Tel: 01454 411720 07872 330444
Website: http://www.cofa-eng.co.uk
Manufacturers of custom bicycle frame building parts and frame building jigs

BEAR FRAME BUILDING SUPPLIES: Unit 8, Acacia Close, Cherrycourt Way, Leighton Buzzard, LU7 4QE
Tel: 01525 851337
Website: http://bearframesupplies.co.uk

REVOLUCION FRAMES: David Protheroe sells a limited range of Carbon fibre tube sets for the home builder
email:01stimpressions@googlemail.com, or contact directly on 0755141474

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.


Bespoke Saddle Coverings

I have previously mentioned GRAFTON SADDLER in a review of a former Bespoke Bristol, in …


I copied this handlebar from Jon Thompson, who made some in this fashion for fixies …

Oxy-Propane Brazing Update 3

I use oxygen and propane for my brazing. I did not want the expense and …


Related Posts


New Framebuilders Resource Website

Eric Meinert of disc brake fixture fame ( incepi.net) has started a framebuilders resource website which has the largest …


Flux Removal

Probably most novice framebuilders use flux and getting it off can be particularly tedious. I admit that I have …


Hot and Cold setting

The only adjustment needed on the first frame I built on my course was to adjust the chain stays …