IMG_1041

The Paterek Manual for Bicycle Framebuilders Third Edition 2004.
This used to be available direct from the author but his website appears to have gone some time ago.
Acknowledged as the most comprehensive modern guide to traditional framebuilding. Covers all aspects of lugged and fillet brazing frames and includes tandems. Does not teach you how to braze and assumes this you should learn this elsewhere. His method is probably not the one most framebuilders now use as he builds on a table with full size drawings otherwise using fixtures for sub assemblies. However all the information is still relevant to jig builders. I purchased this before I built my first frame at home and found it invaluable, enabling me to tackle aspects I was unsure of with confidence. It was nearly as good as having your own tutor at home. Well worth the money.

NB. Although there is no source of new paper copies of the manual it can be purchased as a Kindle download from Amazon in two volumes costing less than £30. (I paid over £60 for my hard copy from the USA). You can also get an “App” from Amazon enabling you to download and read the content on your PC or Apple devices.

PLEASE NOTE: I have absolutely no connection with Amazon

SNH

IMG_1043
Zinn & the Art of Road Bike maintenance Third Edition.
Leonard Zinn
A standard maintenance text,now in its fourth edition. Comprehensive and readable. No photo’s and excellent line drawings. Guidance on basic bike fitting and wheelbuilding. Covers stuff such as v brakes etc for cross bikes as well as the usual road biased equipment. Also does other books in the series for Mountain Bikes and Triathlon Bikes.
Very good value for money.

SNH

51kQC7GI0YL
Lugged Bicycle Frame Construction, A Manual for the First Time Builder.
Expanded Second Edition.
Marc-Andre R. Chimonas
I read this book before building my first frame at home and rapidly decided I needed to buy the Paterek Manual, a book acknowledged by the author. Another American book written by someone who taught himself framebuilding. Though not bereft of useful information it does give guidance only on the use of silver solder and a torch powered by canisters of MAPP gas rather than the use of oxygen.
It tends to be rather prescriptive of how to build, building a bike entirely determined by the angles of the lugs. It also tends to be repetitive and is stuffed full of acronyms. I have some sympathy for the author’s assertions that framebuilding courses are expensive and in the USA may be prohibitively far away, but that hardly applies in the UK. A fourth edition is now available which apparently covers oxy -fuel methods.
The third edition is still available from Amazon for nearly £100! You may be able to track down my edition in a charity shop in Chorley much more cheaply.

SNH

fullsizeoutput_603

Creative Bicycle design and Framebuilding.
Ed Foster , La Suprema Handcrafted Steel, Tucson, Arizona
http://www.edsbikes.us

This is a self published book printed by Amazon from another Framebuilder from the USA. I admit to being rather disappointed with my learning experience from reading it, but it is easy to read and gives a lot of sensible, if rather philosophical, advice on the ethics of frame building. It takes a common sense approach and includes black and white photographs of some of the methods and stages of the building process. The author is reassuring in his assertion that no one method of manufacture should be taken as gospel but his preferred methods seem to follow a lot of the teaching from the Paterek manual and often in less detail. He openly states he has made a lot of fixtures from the Paterek plans and uses similar methods including building with reference to full size drawings. Whilst a frame jig is used in some of the process there is little reference to using full jigs, rather concentrating in a more piecemeal approach in fixtures and using a truing table. He also makes extensive use of a milling machine and other machine tools reflecting his own commercial practice. For someone just starting out it will be a reassuring read but it is a long way off being an instructive frame building manual or text book  and does not really update the Paterek manual for the UK frame builder.

SNH

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Categories

Internal Cable Routing Updated

I have done this procedure several times on completed frames, but it is sensible to …

Road Legal Fixed Wheel Bike

I had my 1969 Bob Jackson Merlin frame re-instated to an original specification, which left …

Bespoke Saddle Coverings

I have previously mentioned GRAFTON SADDLER in a review of a former Bespoke Bristol, in …

Archives

Related Posts

IMG_1870

Bespoke 2015

I was given the privilege of exhibiting at this year’s Bespoke bicycle show in Bristol where I hoped to …

IMG_3695

Femi 782XL Metal Cutting Bandsaw – Review

I have wanted a bandsaw for some time but have been deterred by their size and weight in as …

Scan 29 Oct 2020 at 8.01 pm

My Route to Framebuilding

When I was a youngster in the late 60’s, early 70’s, every cyclist wanted a Reynolds 531 steel framed …