Having previously made a balance bike I now need to follow this up with a pedal bike. This has proved to be quite a challenge. Having come up with a design from the child’s existing measurements using BikeCad I needed 14 inch wheels. These are almost impossible to find as is a suitably small chain set. Eventually after much searching I decided to buy a donor bike for some of the parts. I wasn’t able to find a suitable one in a hurry on Ebay so headed to my local Argos (other retailers are available) and purchased very heavy 14 inch bike. Like all similar bikes it has very fat tyres and weird caliper brakes that make contact on the undersurface of the rim. The chainset is basic press fit with cheap bearings and lightweight 1/8 inch chain. Surprisingly the bottom bracket was a standard adult width and the dimensions of the bottom bracket very close to a standard PF86, though not quite. Having started down this road it looks like I will have to bite the bullet and use the wheels, chainset and brakes and maybe the chainguard.